825ml 10:1 ratio Empty Cartridges with Included Pistons and Sealing Caps

Description

825ml 10:1 ratio Empty Cartridges with Included Pistons and Sealing Caps
2-Part (dual-component) 10:1 ratio 825ml (27.9oz) empty Adhesive Cartridges, with included Resealable Caps and Sealing Pistons. Sulzer MixPac Cartridge Part Number: AJ 825-10-30-05 (#301809) Available in 2 kit packages, plus Accessories: Empty Cartridges and Pistons Starter Kit with Dispenser Useful Accessories About the Cartridges: These cartridges include matching pistons and a re-sealable tip (or cap). They are ready for filling with material, storing and dispensing. These 2-Part cartridges are industrial grade and silicone free. The cartridge design/fit using the "J-System", and are manufactured by Sulzer MixPac, the industry leader in 2-part fluid packaging and dispensing. Rated up to 100psi sustained pressure. The Cartridge design/fit using the industrial and construction standard "J-System" template. The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins. Each kit includes different cartridge-count options… either 5, 10, 25, 50, or 100 cartridges with the necessary cap and sealing pistons to close and seal the empty cartridges. These cartridges are perfect for storing and applying bulk adhesives that use a 10:1 mix ratio, where precise metering and mixing is needed. About the Starter Kits: Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and either one Sulzer MixPac 825 dispenser. We recommend checking out our Starter Kits to get set up and running. Or if you prefer getting the dispenser separately, check out the Sulzer MixPac 825ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. Total Cartridge Length (bottom to cap tip 10 3/8 inches Barrel length 7 15/16 inches Total cartridge width (across both barrels) 4 1/4 inches Barrel Inner Diameters (10:1 ratio so one side is larger than the other side) 2.93 inches x 0.9 inches Mixer Style Bell Style or Integrated-Nut Style, and either Helix or Quadro/Square mixing element styles will work. These fit a variety of cartridge sizes, from 200ml, 400ml, 600ml to larger 825ml and 1,500ml Total Cartridge Volume (both barrels combined) 825ml , or 27.9oz NOTE: Additional accessories needed. Consider the pre-configured starter kits, or view the accessories scroll-bar below to ensure you get what you need. For example, with these empty cartridges you will also need mixing nozzles and a dispensing product to push/extrude/dispense the adhesive out. We recommend also getting one of our 6825ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits. The mixing nozzles needed are of the "Bell" or “Integrated Nut” design, which easily twist on and off the cartridge end. These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories. These Cartridges use standard static mixer nozzles. Cartridges immediately available in mix ratio's 1:1 or 2:1. Mix ratios of 4:1 and 10:1 can be ordered but on a special-order basis due to infrequent market demand. Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic. The “J” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “J” System cartridges and mixers. Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.
825ml 10:1 ratio Empty Cartridges with Included Pistons and Sealing Caps
2-Part (dual-component) 10:1 ratio
825ml (27.9oz)
empty Adhesive Cartridges, with included Resealable Caps and Sealing Pistons.
Sulzer MixPac Cartridge Part Number:
AJ 825-10-30-05 (#301809)
Available in 2 kit packages, plus Accessories:
Empty Cartridges and Pistons
Starter Kit with Dispenser
Useful Accessories
About the Cartridges:
These cartridges include matching pistons and a re-sealable tip (or cap). They are ready for filling with material, storing and dispensing. These 2-Part cartridges are industrial grade and silicone free.  The cartridge design/fit using the "J-System", and are manufactured by Sulzer MixPac, the industry leader in 2-part fluid packaging and dispensing.
Rated up to 100psi sustained pressure.  The Cartridge design/fit using the industrial and construction standard "J-System" template.  The 2-Part design keeps the two adhesive parts separate, until a separate mixing Nozzle is attached, where the two parts are pushed or extruded into the mixing Nozzle and bonding or curing begins.
Each kit includes different cartridge-count options… either 5, 10, 25, 50, or 100 cartridges with the necessary cap and sealing pistons to close and seal the empty cartridges.
These cartridges are perfect for storing and applying bulk adhesives that use a 10:1 mix ratio, where precise metering and mixing is needed.
About the Starter Kits:
Each Starter Kit includes either 5, 10, 25, 50, or 100 cartridges, related sealing pistons and cartridge caps, mixing nozzles (one nozzle for each cartridge in your kit), and either one Sulzer MixPac 825 dispenser.
We recommend checking out our Starter Kits to get set up and running.  Or if you prefer getting the dispenser separately, check out the Sulzer MixPac 825ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits.
Total Cartridge Length (bottom to cap tip
10 3/8 inches
Barrel length
7  15/16 inches
Total cartridge width (across both barrels)
4 1/4 inches
Barrel Inner Diameters (10:1 ratio so one side is larger than the other side)
2.93 inches  x 0.9 inches
Mixer Style
Bell Style or Integrated-Nut Style, and either Helix or Quadro/Square mixing element styles will work.  These fit a variety of cartridge sizes, from 200ml, 400ml, 600ml to larger 825ml and 1,500ml
Total Cartridge Volume (both barrels combined)
825ml , or 27.9oz
NOTE:
Additional accessories needed.  Consider the pre-configured starter kits, or view the accessories scroll-bar below to ensure you get what you need.  For example, with these empty cartridges you will also need mixing nozzles and a dispensing product to push/extrude/dispense the adhesive out.  We recommend also getting one of our 6825ml Dispensers, which will enable you to dispense the adhesives out of these cartridge kits.  The mixing nozzles needed are of the "Bell" or “Integrated Nut” design, which easily twist on and off the cartridge end.  These nozzles tend to be difficult to clean and store after their first use, and therefore generally considered to be single-use accessories.  These Cartridges use standard static mixer nozzles. Cartridges immediately available in mix ratio's 1:1 or 2:1.  Mix ratios of 4:1 and 10:1 can be ordered but on a special-order basis due to infrequent market demand. Products are industrial grade safe to 100 psi and are certified silicone free. Dispensers are available for all size cartridges either in manual of pneumatic.  The “J” System is comprised of a small lightweight, hand-held manual dispenser which dispenses 2-component adhesives through “J” System cartridges and mixers.  Cartridge systems are available in a variety of volumetric ratios. Please be sure to select the correct ratio for your two component system.
×
×
×
×
×
×
×
×
×
Tell a friend
Visit store
Watch now
Postage info
Click the Postage tab above the listing description for more info
Click the Postage tab above the listing description for more info!
Additional delivery notes
PICK UP OPTION
Sorry, our items are NOT available for pick-up.
PAYING VIA PAYPAL
We accept PayPal on our all our items so you can shop with confidence.
Simple choose the PayPal option when proceeding through the checkout.
Paying via Direct Deposit
Simply add the freight cost to the item cost and forward the total amount to the address to be provided following your purchase.
Additional Information
No additional information at this time
Ask seller a question
You might also like
Atlas Plastics - ABS Plastic Welding Rods & Coils - Black
Atlas Pro Small Manual Hand Plunger for 50ml 2:1 ratio cartridges
Atlas Pro Caulking Gun Conversion Kit for 2:1 ratio 50ml Cartridges
Devcon Dev-Thane 5-14503 Gray 5-Min Urethane Adhesive 50ML cartridge
Contact
To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist.
Ask seller a question
© Perigee Direct
Postage
Click the Postage tab above the listing description for more info
Payment
Accepted Payment Methods
PayPal
Direct Deposit
Returns
Returns are accepted
Items must be returned within 30 days of the auction ending
Buyer will pay for return shipping.
Additional Information:
You may return for a refund or exchange of unopened items, within 30 days of receiving your product. Many items are regulated Dangerous Goods, and therefore a 20% reprocessing and restocking fee is applied to ensure compliance is preserved.
eBay integration
by